Info centre "EasyTouch"
163
Fig. 112
Incremental encoder (1)
The incremental encoder can be turned and inched to the left/right. Operation of the incremental
encoder is interpreted differently depending on the display/mode.
In the main menu:
• To scroll up/down the menu, turn the incremental encoder to the left/right.
• To switch to the selected menu, actuate the incremental encoder.
In any menu (diagnostics):
• To mark an input field, turn the incremental encoder to the left/right (the input field is
highlighted in "blue").
• To switch to input mode, actuate the incremental encoder (the input field is highlighted in
"yellow").
In input mode:
• To reduce/increase the particular value, turn the incremental encoder to the left/right.
• To accept the set value and leave input mode, actuate the incremental encoder.
Menu key (2)
Actuation of the menu key is interpreted differently depending on the display/mode.
• Switch to the main menu (main level) by pressing the menu key on the working screen.
• Switch to the level above by pressing the menu key in the main menu.
• Switch to the working screen by pressing the menu key on the main level.
• Switch to the working screen by pressing holding down the menu key in any menu (input
mode not active) for longer than 3 seconds.
• By pressing the menu key in input mode, discard the change to the value and leave input
mode.
To Next Page
Loading...
