Krone BiG X 770-3 - Page 179

Info centre "EasyTouch"
179
Setting the setpoint speed (3)
The setpoint speed must be adjusted to the operating and harvesting conditions in order to
guarantee optimum crop flow.
5 6
7
8
B C D
BX500006_2
IV
1
2
4
3
Fig. 124
• To reduce the setpoint speed, press the
key.
• To increase the setpoint speed, press the
key.
Alternatively, you can also make the setting with the incremental encoder, see page 163.

NOTE
In maize mode, the setpoint speed is reduced to 400 rpm after each restart, if it was set higher
beforehand.
The current actual speed (4) of the front attachment is displayed.