Krone BiG X 770-3 - Intake Menu Area

Info centre "EasyTouch"
180
8.2.4.3 Intake menu area
The chop length is determined by the speed of the intake rollers and the number of blades that
are used.
The settings information section (IV) displays the current chop length and the status of the
maturity level detection in the intake menu area.
5 6
7 8
B C D
BX500007_2
IV
Fig. 125
Displaying the chop length
Icon
Designation
Explanation
Chop length
Shows the current chop length in mm or inch.
Maturity level detection active
If maturity level detection (AutoScan) is
activated, the optimum chop length is
automatically calculated and set, see page 199.
Maturity level detection
inactive
The chop length is not automatically adjusted.