Krone BiG X 770-3 - Page 181

Info centre "EasyTouch"
181
Adjusting the chop length
• To reduce the chop length, press the
5
key.
• To increase the chop length, press the
6
key.
Alternatively, you can also make the setting with the incremental encoder, see page 163.
Two different chop lengths (value 1/value 2) can be saved and retrieved via the control lever,
see page 577.
Depending on the set number of blades, the chop length can be set in different areas, see page
85. The chop length double at half set of blades.

NOTICE
As soon as the chop length is manually adjusted or a saved value is retrieved via the control
lever, the automatic adjustment of the chop length becomes inactive depending on the degree of
maturity.