Krone BiG X 770-3 - Grass Pick-Up Mode

Info centre "EasyTouch"
186
8.2.5.2 Grass pick-up mode
5 6
7 8
B C D
BX770170
Fig. 130
• You can use the incremental encoder to choose the operating mode setting. The selection
box is highlighted in colour.
• Press the incremental encoder to jump to the selection box.
• Turn the incremental encoder to set the required grass pick-up mode .
• Press the incremental encoder to accept the setting and to exit the selection box.
• To exit the settings mask, press the
D
key or the key on the incremental encoder.
Setting the grass pick-up working width
The working width corresponds to the swathed width.
5 6
7 8
B C D
BX770171
Fig. 131
• You can use the incremental encoder to choose the working width setting. The selection
box is highlighted in colour.
• Press the incremental encoder to jump to the selection box.
• You can use the incremental encoder to set the required working width.
• Press the incremental encoder to accept the setting and to exit the selection box.
• To exit the settings mask, press the
D
key or the key on the incremental encoder.