Krone BiG X 770-3 - Setting the Corn Conditioner Distance

Info centre "EasyTouch"
220
8.2.5.7 Setting the corn conditioner distance
If one of the modes maize header or XDisc is set, the info area settings (V) in the display shows
the
icon and the current actual value of the corn conditioner distance.
5 6
7 8
B C D BX500012_2
Fig. 163
Prerequisites:
– The corn conditioner has been calibrated prior to the setting, see page 290.
• You can use the incremental encoder to choose the corn conditioner setting. The selection
box is highlighted in colour.
• Press the incremental encoder to jump to the selection box.
• You can use the incremental encoder to set the distance.
The currently set target distance is approached automatically.
• Press the incremental encoder to accept the setting and to exit the selection box.
• To exit the settings mask, press the
D
key or the key on the incremental encoder.