Krone BiG X 770-3 - Deleting the Day Counter; Switching to Customer Datacounters

Info centre "EasyTouch"
253
8.5.1 Deleting the day counter
Fig. 190
The day counters 1 to 3 can be deleted in this menu.
The main menu level is active.
• You can use the incremental encoder to select the main menu 2 Counters.
• Press the incremental encoder.
The display shows various counters.
• Press the key
for or for to choose the day counter (1) to be deleted.
• Press the key
C
under to delete all counters for the selected day counter.
• Press the
key beside the incremental encoder to go back one menu level.
• Press the key
B
under to call up the working screen.
8.5.2 Switching to Customer DataCounters
• Press the
key below the softkey to open the "Customer data counter" menu.
For additional information, see page 207.