Info centre "EasyTouch"
258
8.6.3 Menu 3-2 Grind/Counterblade
Fig. 193
Main menu 3 Maintenance is active.
• You can use the incremental encoder to select menu 3-2 Grinding/counterblade.
• Press the incremental encoder.
The display shows the menu level Grinding/counterblade.
The display shows warning messages that draw attention to the special hazards associated with
grinding the chopping blades.
Risk of injury due to failure to observe warnings on the display!
Risk of injury due to hazardous components and other residual risks if users or third parties
enter or reach into the danger zone because they are unaware of a risk.
• Ensure that everyone who works with or on the machine familiarises themselves with the
meaning of the warnings and observes them.
Displaying unfulfilled switching-on conditions and disturbances, see page 255.
To Next Page
Loading...
