Info centre "EasyTouch"
299
Status displays
The calibration process has been stopped.
The calibration process is currently running.
A rotational speed was measured at the chopping drum. The current values
were saved.
The calibration process was concluded successfully.
Displays on the display
Actual current to the valve Y12 "Main coupling ON" in mA.
Current rotational speed of the chopping drum in rpm.
All conditions for automatic calibration of the main coupling have been
fulfilled.
– The calibration can be started with the
– The calibration is currently running and can be stopped using the
key. No values are saved.
– The calibration process cannot be started because e.g. one or more
switching-on conditions have not been fulfilled.
The rotational speed of the diesel engine in rpm
Displaying unfulfilled switching-on conditions and disturbances, see page 255.
To Next Page
Loading...
