Krone BiG X 770-3 - Page 308

Info centre "EasyTouch"
308
Overview of possible CANBUS errors
Symbol
Description
Symbol
Description
Error CAN to ADM 1/MFR
Error CAN to control lever
Error CAN to ADM 2 (only double
engine)
Error CAN to KMC2
Error CAN to autopilot
Error CAN to KMC3
Error CAN to CUC
Error CAN to metal detection
Error CAN to DIOM
Error CAN to maturity level
detection
Error CAN to EMR
Error CAN to DRC
Error CAN to manual operation
Table 5
The switching-on conditions must be met in order for the diagnostic execution and the errors
must be eliminated.
An appropriate remedy must be found otherwise supply voltages are not available, sensors
return no values and actuators cannot be switched on.