Krone BiG X 770-3 - General Status Displays Sensors;Actuators

Info centre "EasyTouch"
309
8.8.1.1 General Status Displays Sensors/Actuators
The following status displays may appear during diagnostics of all sensors and actuators:
Icon
Description
Icon
Description
Error/implausible
Cable break
Broken cable sensor
Short circuit
Sensor attenuated
Actuator ON
Sensor unattenuated
Actuator OFF
Short circuit sensor
Actuator error
Sensor OK
Wiring
/Sensor defective
Normal operation,
Process active
Voltage value too large
Process inactive
Stop requested
Table 6
Note
The status displays cable break and short circuit are not displayed for all actuators.