Driving and Transport
542
Notes on towing
• Move the lifting unit, front attachment and spout into the transport position.
• The machine is shut down and secured, see page 41.
• Pull out the fuses F90 and F91 on the relay circuit board console, which sets the hydraulic
motors for the traction drive in neutral position (no displacement).
• Switch the ignition to ignition stage II so that the flashing lights (hazard lights) and brake
lamps will work.
• Manually release the parking brake, see page 543.
• Switch the release switch "road/field" into the road travel position.
Increased steering and braking forces must be applied with the engine switched off.
Fig. 482
• Mount the tow bar exclusively on the tow coupling (1).
• The machine may only be pushed.
• The maximum towing speed is 8 km/h.
• The maximum towing duration is 45 minutes.
To Next Page
Loading...
