Operation
588
18.5.17 Blowing device for intake unit and grinding device
Fig. 518
The blowing device (1) cleans areas on the intake unit (2) and the grinding device (3).
This increases the functional safety of the machine.
Setting the blowing times
In menu 1-1 "Parameters" (driver level), in the sub-menu 1-1-15 "Work"
, you can set
the parameter 33651 (switch-off duration) and parameter 33652 (switch-on duration) for the
cleaning blower.
Recommended settings:
• Parameter 33651 (switch-off duration) = 60 s.
• Parameter 33652 (switch-on duration) = 3 s.
Function test
Switching-on conditions:
– The release switch "road/field" is switched on.
– The quick-stop switch must not be pressed.
– The lifting unit is in the working position.
– The machine is operating.
If the status line of the working screen displays the icon, the blowing device is active.
• Check the set times.
To Next Page
Loading...
