Maintenance – Basic Machine
630
21.4 Maintenance of brake (Bosch)
Risk of injury due to an inoperable brake!
People may be seriously injured or killed by an inoperable
brake.
• Bring the machine to a complete stop.
• Switch off the engine, remove the ignition key and take it with you.
• Secure the machine against rolling using wheel chocks.
• Contact KRONE customer service.
NOTE
Also follow the operating instructions for the vehicle.
Daily or when moving off
• Check the function of the service brake each time before moving off. To do this, drive the
vehicle on a level surface with max. torque against the activated service brake.
➔ If the vehicle cannot be moved while the service brake is activated, the service brake is
functioning properly.
➔ If the vehicle can be moved even though the service brake is applied, the proper
function of the service brake is no longer guaranteed.
• If the proper function of the service brake is not guaranteed, immediately shut down the
vehicle and contact KRONE customer service.
Checking within the limits of the national regulations
• Check the function of the service brake on a regular basis in accordance with national
regulations. This check can take place as part of a TÜV inspection of the vehicle, for
example. In this case, have a brake deceleration measurement performed. The target value
must match the vehicle specification.
After emergency braking
Irrespective of the maintenance intervals, the brake must be completely inspected following
emergency braking when the hydrostats have failed.
• To do this, carry out an visual inspection of the discs, springs and sealing elements while
the multi-disc brake is dismounted. Contact KRONE customer service.
To Next Page
Loading...
