Krone BiG X 770-3 - Belt Drives; Checking the Belt Pulley; Checking the Power Belt

Maintenance – Basic Machine
631
21.5 Belt drives
21.5.1 Checking the belt pulley
BX480492
1
1
Fig. 553

NOTE
If worn or soiled, the complete power transmission of the power belt and belt pulley is not
guaranteed.

NOTE
In case of longer standstill times outdoors (e.g. outside the season), water can collect between
the belt pulley and the power belt which could lead to heavy rust formation.
In order to prevent this, it is recommended to dismount the power belt.
• Check the edges of the belt pulleys (1) for wear and replace if required.
• Check the belt pulley for damage and replace if required.
• Check the belt pulley for soiling (oil, grease) and clean if required.
21.5.2 Checking the power belt
BX480491
1
2
Fig. 554

NOTE
If worn or soiled, the complete power transmission of the power belt and belt pulley is not
guaranteed.