Maintenance – Engine
649
Checking the coolant level
Fig. 571
• Check the coolant level in the expansion reservoir (1) in the viewing pane (2).
➔ The coolant level must reach up to the middle of the viewing pane (2); refill coolant if
necessary.
Refilling coolant
Turn the cover (3) on the filler neck of the expansion reservoir (1) to the right catch point and
allow residual pressure to escape slowly.
• Fully open the cover (3).
• Fill with coolant up to the middle of the viewing pane (2).
• Close the cover (3) on the filler neck of the expansion reservoir.
• Check the coolant level again after running the engine for a few minutes.
To Next Page
Loading...
