Krone BiG X 770-3 - Design of the Display; Display Working Screen with Cropcontrol TC Sync System; Operating Cropcontrol System with Installed Cropcontrol TC Sync. System Via KRONE CCI 200 Operating Terminal

Appendix – CropControl System
51
Pos: 12.1 /Überschriften/Überschriften 2/A-E/C/CropControl mit Krone CCI 200 Bedieneinheit_mit AutoCalibrate @ 458\mod_1464853117980_78.docx @ 3096151 @ 2 @ 1
1.4 Operating CropControl System with Installed CropControl TC Sync. System via KRONE
CCI 200 Operating Terminal
Pos: 12.2 /BA/Info-Center/CropControl BiG X 600-1100-1/Arbeitsbild autocalibrate @ 458\mod_1464850733988_78.docx @ 3095958 @ 3 @ 1
1.4.1 Display Working Screen with CropControl TC Sync System
CC000987
mm
0
Fig. 43
Pos: 12.3 /BA/Info-Center/CropControl BiG X 600-1100-1/Aufbau Display @ 249\mod_1396860558226_78.docx @ 1934629 @ 3 @ 1
1.4.2 Design of the Display
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11F11
F12
CC000739
Fig. 44
The display of the terminal is divided up into the following sections:
Status line (I)
– The status displays of the machine.
Function keys (II) (F1 to F12)
– CropControl is operated via function keys. The softkeys (graphics) belonging to the function
keys are touch sensitive.
Main window (III)
Pos: 12.4 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1