Appendix – CropControl System
62
Pos: 12.31 /Überschriften/Überschriften 4/A-E/Durchführung einer Gegenwiegung im TaskController @ 483\mod_1477473551001_78.docx @ 3255535 @ @ 1
2. Performing Counterweighing in the Task Controller of the Operating Terminal CCI 200
Pos: 12.32 /BA/Info-Center/CropControl BiG X 600-1100-1/Eine Gegenwiegung durchführen TC @ 484\mod_1479125754600_78.docx @ 3261785 @ @ 1
• Position the empty tractor/wagon combination next to the machine.
• An order is started and is running, refer to chapter Operation, “Operating CropControl
System with Installed CropControl TC Sync System via KRONE CCI 200 Operating
Terminal”, “Creating CCI 200 Order and Performing Counterweighing”, “Creating Order”.
Fig. 56
• Press the function key to start counterweighing. The icon changes to
.
The number of the currently active counterweighing is displayed below the scale icon.
Notice: Memorise or write down the number of the counterweighing or the current time.
• Load the tractor/wagon combination. Ensure that all harvested chopping crops are loaded
on the tractor/wagon combination.
• Press the
function key to stop the active counterweighing. The icon changes to .
• Weigh the tractor/wagon combination. Make sure no crops are lost when travelling to the
scale.
Notice
While waiting for the weight of the counterweighing, you can continue chopping, another order
can be started or another counterweighing can be performed.
Pos: 12.33 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
To Next Page
Loading...
