Appendix – CropControl System
96
Pos: 12.119 /Überschriften/Zwischenüberschriften/A-EAllgemeine Meldungen @ 260\mod_1398864544105_78.docx @ 1986512 @ @ 1
General messages
Pos: 12.120 /BA/Info-Center/CropControl BiG X 600-1100-1/Allgemeine Meldungen CC @ 259\mod_1398694679037_78.docx @ 1981878 @ @ 1
– Computer internal plug-in fuse 2
defective.
– Short circuit on voltage output
+12V2FU_L.
– Check wiring for short circuit.
Replace fuse.
– Fuse 3 defective (self-repairing)
– Short circuit on voltage outputs
+12V3FU_L
– Check wiring for short circuit.
EEPROM error
– Job computer defective
Undervoltage back-up battery
– Back-up battery defective
– Check the back-up battery and
replace it, if necessary.
Undervoltage
– Fuse -22F39 defective
Overvoltage
– Alternator is defective
RAM error
– Back-up battery defective
– Job computer defective
– Check the back-up battery and
replace it, if necessary.
– Replace job computer.
The yield counter for the currently
active cultivated area will soon
overflow (jumps to 0 t).
– The yield counter of the
currently active cultivated area
is active for too long.
– Use another cultivated area or
delete the currently active
cultivated area.
Pos: 12.121 /BA/Info-Center/CropControl BiG X 600-1100-1/Allgemeine Meldung A20 @ 484\mod_1478849264569_78.docx @ 3260949 @ @ 1
– Intake is soiled
– Path sensor is not calibrated
– Clean the intake so that the pre-
compression rollers can be
moved back to the basic position.
– After cleaning is complete,
recalibrate the path sensor.
Pos: 12.122 /BA/Info-Center/CropControl BiG X 600-1100-1/Physikalische Meldung A22 @ 465\mod_1467111430980_78.docx @ 3131467 @ @ 1
The order:
– has not been started with
CropControl TC Sync.
– has meanwhile been continued
without CropControl TC Sync.
– Start a new order and do not
continue the previous order.
Pos: 12.123 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1