I - 3
General Aspects
1.2.8 Technical Data - COMPRIMA F 125/ COMPRIMA F 125 XC
Type COMPRIMA F 125 COMPRIMA F 1251 XC
(without cutting system) (with cutting system)
Axle single axle single axle tandem axle
Width approx 15.0/55-17 2620 2620 2790
500/50-17 2650 2650 2900
500/55-20 2660
Permissible weights see information listed on the type plate
Track width Track width
Tyres 15.0/55-17/10 PR 2150
500/50-17/10 PR 2200 2400
500/55-20/12PR 2200
Length approx. 4700
Height approx. 2650 Standard tyres
Pick-up width 2150
Bale Diameter approx. 1250
dimensions
Width approx. 1200
Power requirement approx. 36 kW (50 PS)
Drive speed (PTO shaft) 540 r.p.m.
Maximum permissible operating max. 200 bar
pressure of hydraulic system min. 150 bar
Minimum oil quality Öl ISO VG 46
max. oil temperature 80° C
Delivery rate hydraulics min. 30 l/min
max. 60 l/min
el. Lighting 12 Volt – 7-pole connector
connections Operation 12 Volt - 3-pole connector (DIN 9680)
Twine
Open air storage synthetic twine 400 - 600 m/kg
Indoor storage sisal twine 150 - 300 m/kg
Net
Width maximum 1300 mm
Sleeve length 1250 - 1330 mm
Sleeve diameter ø 75 - 80 mm
Roll diameter max. 310 mm
Overload protection (PTO shaft)
540 r.p.m.
Friction clutch 1450 Nm –
Cam-type cut-out clutch 1500 Nm 1950 Nm (17 blades)
2300 Nm (26 blades)
To Next Page
Loading...
