Krone Comprima F 155 XC - 11.17.4 Setting the Number of Twine Layers

VIII - 23
KRONE operation terminal Beta
8.11 Main Menu 4 "Service"
Calling the main menu
• Call the main menu with the key.
• You can select main menu 4 with the
or keys. The icon is shown in reverse colours.
• Press the key.
The display shows menu level 4 "Service".
Menu level 4 "Service" is divided into 3 menus:
• = menu 4-2 "Manual sensor test"
• = menu 4-4 "Manual actuator test"
• = menu 4-7 "Position Motor"
8.11.1 Menu 4-2 "Manual sensor test"
In the manual sensor test, the sensors are checked for
errors. In addition, the sensors can be correctly
adjusted in the manual sensor test.
There is no guarantee the machine is working correctly
until after the sensors have been adjusted.
The PTO must not be turning during
the sensor test.
Calling the menu
Main menu 4 "Service" is called.
• You can select menu 4-2 with the or
keys. The icon is shown in reverse colours.
• Press the key.
The display shows menu 4-2 "Manual sensor test".
Selecting the sensor
• Select the sensor with the or keys.
The selected sensor at the left in the display is shown
in reverse colours and is tested.
4-2
BPM50310
4-2
BPM50310
RPK50500
B1
1
state
1
8,2V
7,4V
5,2V
2,8V
7,9V
4-2
BPM50330_1
4