Krone Comprima F 155 XC - 3.4.4 Children in danger; 3.4.5 Coupling the machine safely; 3.4.6 Structural changes to the machine; 3.4.7 Additional equipment and spare parts

I - 6
General Aspects
1.2.11 Technical Data - COMPRIMA V 180 / COMPRIMA V 180 XC
Type COMPRIMA V 180 COMPRIMA V 180 XC
(without cutting system) (with cutting system)
Axle single axle single axle tandem axle
Width approx 15.0/55-17 2610 2610 2790
500/50-17 2660 2660 2895
500/55-20 2660 Running 2660 Running -
2800 Braking 2800 Braking
600/50-22,5 - 2930 -
Permissible weights see information listed on the type plate
Track width Track width
Tyres 15.0/55-17/10 PR 2150
500/50-17/10 PR 2200 2400
500/55-20/12 PR 2200
Length approx. 5295
With bale ejector 5750
Height approx. 3150 Standard tyres
Pick-up width 2150
Bale Diameter approx. 900 - 1800
dimensions
Width approx. 1200
Power requirement approx. 40 kW (55 PS)
Drive speed (PTO shaft) 540 r.p.m.
Maximum permissible operating min. 165 bar
pressure of hydraulic system max. 200 bar
Minimum oil quality Öl ISO VG 46
max. oil temperature 80° C
Delivery rate hydraulics min. 30 l/min
max. 60 l/min
el. connections
Lighting 12 Volt – 7-pole connector
Operation 12 Volt - 3-pole connector (DIN 9680)
Twine
Open air storage synthetic twine 400 - 600 m/kg
Indoor storage sisal twine 150 - 300 m/kg
Net
Width maximum 1300 mm
Sleeve length 1250 - 1330 mm
Sleeve diameter ø 75 - 80 mm
Roll diameter max. 310 mm (3000 m roll)
Overload protection (PTO shaft)
Friction clutch 1450 Nm –
Cam-type cut-out clutch 1300 Nm 1950 Nm1950 Nm (17 blades)
2300 NM (26 blades)
540 r.p.m.