Krone Comprima F 155 XC - 11.19 Net and chamber film wrapping; 11.19.1 Functionality of the net and chamber film wrapping

VIII - 29
KRONE operation terminal Beta
Possible digital actuators (depending on how the
machine is equipped)
Diagnostics digital actuators
Errors are only displayed if the actuator is turned on
and a test is possible for the actuator (see the table
called "Possible digital actuators"). If necessary, the
LED on the plug right on the actuator can be used for
monitoring.
• Press the key for softkey .
• Press the key for softkey .
State:
• Actuator on
• Actuator off
• General actuator error
• No power supply;
fuse is probably defective
Possible motors (depending on how the machine is
equipped)
• Press the key for softkey .
(move out motor) inching operation only.
• Press the key for softkey .
(move in motor) inching operation only.
No. Icon Description
M1 Net wrapping setting motor
• You can use the
esc
6
key to close the menu currently
displayed.
The display shows menu level 4 "Service".
• Pressing the
esc
6
key twice brings up the basic screen.
No. Icon Description
Y1 Valve Pick-up
Y3
Y5
Valve ground adjustment
RPK50530
RPK50540
1
state
1
4-4
ON
M1
M1