Dear Customer:
You have now received operating instructions for the KRONE
product which you have purchased.
These operating instructions contain important information for
the proper use and safe operation of the machine.
If these operating instructions should for any reason become
wholly or partially unusable, you can obtain replacement
operating instructions for your machine by stating the number
given on the other side.
EC Declaration of Conformity
We,
hereby declare as manufacturer of the product named below, on our sole responsibility,
that the
Machine: Krone Round Baler
Type / Types: Comprima F 125 / Comprima F 125 XC
Comprima F 155 / Comprima F 155 XC
Comprima V 150 / Comprima V 150 XC
Comprima V 180 / Comprima V 180 XC
to which this declaration refers is in compliance with the relevant provisions of
EC Directive 2006/42/EC (Machinery) and EC Directive 2004/108/EC (EMC)
The signing Managing Director is authorised to compile the technical documents.
Spelle, 14.10.2010
Dr.-Ing. Josef Horstmann
(Managing Director, Design and Development)
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Str. 10, D-48480 Spelle
Year of manufacture: Machine No.:
To Next Page
Loading...
