Krone Comprima F 155 XC - 3.4.11 Keeping safety devices functional; 3.4.12 Personal Protective Equipment

II - 5
Safety
RPN00039_2
1
7
2
8
4
6
3
5
3
+COMPRIMA XC
8
3
8
2.3.1Location of Safety Stickers on the Machine
(COMPRIMA F 125 ; COMPRIMA F155)
The KRONE round baler is equipped with all required safety devices (protective equipment). However, it is not
possible to eliminate all potential hazards on this machine as this would impair its full functional capability.
Corresponding danger notices attached to the machine warn against any dangers.
The safety instructions are provided in the form of so-called warning pictograms. Important information on the
location of these safety signs and what they mean is given below!
Familiarise yourself with the meaning of these warning signs. The text beside them and their
location on the machine indicates the particularly hazardous areas of the machine.
2.3 Introduction
1
Order No. 939 471-1 (1x)
Before putting the machine
into operation read and
observe the operating
instructions and safety
operations.
2
Do not exceed
PTO
speed!
The operating
pressure
of the hydraulic plant
must not exceed 200
bar!
Order No. 939 100-4 (1x)
Right-hand side of the machine
939 100-4
MAX. 540/ min
MAX. 200 bar