Krone Comprima F 155 XC - 7.5 PTO shaft; 7.5.1 Mounting the protective cap for the universal shaft of the tractor

KRONE ISOBUS-Terminal CCI 100
VI - 6
6.2.2 Connecting the terminal (on tractors without ISOBUS system)
6
5
1
2
3
4
CC00015
7 12
5
8
9
10
11
Fig. 6
Connection terminal to machine
Note
The connection of terminal to machine takes place via a provided cable set (5) (article no.
20 081 224 0).
• Connect plug (2) of cable set (5) with socket (1) (CAN1-IN) of the terminal
• Connect plug (6) (7-pole) of cable set (5) with socket (7) (7-pole) of the machine
• Connect connector plug (4) (article no. 20 081 224 0 included in scope of delivery) with socket (3)
(CAN1-OUT) of the terminal
Connection tractor to machine
Note
The connection of tractor to machine takes place via a provided power cable (8) (article no.
20 080 601 0).
• Connect plug (9) of power cable (8) with continuous current socket (10) of the tractor
• Connect plug (11) (2-pole) of power cable (8) with socket (12) (2-pole) of the machine