KRONE ISOBUS-Terminal CCI 100
VI - 7
6.2.3 Switching the terminal on / off when the machine is not connected
Fig. 7
Note
Before switching the terminal on for the first time make sure that the connections on the device are
fastened right and securely.
By pressing and holding (for approx. 2 sec.) the key (1) (ON/OFF) the terminal will be switched
on or off.
Note
For further information on the functioning of the ISOBUS terminal CCI refer to the terminal operating
instructions included with delivery.
Betriebsanleitung
Version: 1.0
CC-ISOBUS
ISOBUS-Terminal CCI 100/200
Fig. 8
To Next Page
Loading...
