KRONE ISOBUS-Terminal CCI 100
VI - 18
6.7 Menu 1-2 „Bale diameter“ (only for Comprima F125/F155)
CC000236
1-2
n
CC000237
150
125
Fig.18
Displaying the menu
Main menu 1 “Settings” is displayed.
• You can select menu 1-2 with the function key or . The symbol is shown in reverse
colours
• Press function key
The display shows menu 1-2 “Bale diameter".
The symbol in the upper line indicates that the displayed status is saved.
Setting the bale diameter
• You can use function key or to adjust the bale diameter mechanically set on the machine.
The symbol in the top line disappears
• Press the function key . The bale diameter set is saved and the symbol appears in the
upper line
• Pressing the function key closes the called up menu
• Pressing the function key and holding it down brings up the basic screen
To Next Page
Loading...
