Krone Comprima F 155 XC - 8.1.7 Sensor Test Digital

KRONE ISOBUS-Terminal CCI 100
VI - 23
6.7.4 Menu 1-6 “Filling correction”
CC000214
1-6
+
-
CC000215
Fig.22
Note
If the bale size or firmness is to great or not great enough, bale size and firmness can be corrected
within a predefined range with menu 1-6 "Filling correction".
The values can be corrected in the following areas:
Comprima F125/F155
Bale firmness: -10% to +10%
Comprima V150/V180
Bale size: -10cm to +10 cm
Displaying the menu
Main menu 1 “Settings” is displayed.
• You can select menu 1-6 by pressing function key or . The symbol is shown in
reverse colours
• Increase or reduce the desired value via function keys or , the symbol in the upper line
goes out
• Press function key
The display shows menu 1-6 “Filling correction".
The symbol in the upper line indicates that the displayed value is saved.
• Pressing the function key closes the called up menu
• Pressing the function key and holding it down brings up the basic screen