Krone Comprima F 155 XC - 12.14 Adjusting the cutting blade on the tying unit

Settings
200
Pos: 50.42 /Übersc hriften/Überschrif ten 2/P-T/S /Schneidmesser der Garnbi ndeeinrichtung einstellen @ 343\ mod_143322 8272102_78.doc x @ 2597003 @ 2 @ 1
12.14 Adjusting the cutting blade on the tying unit
Pos: 50.43 /Übersc hriften/Zwisch enüberschrifte n/A-E/Bei A usführung Garn- und Netzbindu ng @ 335\mo d_142961846475 0_78.docx @ 2552971 @ @ 1
With twine tying and net tying version
Pos: 50.44 /BA/Sic herheit/7. G efahrenhinweise alt/Rundballenpre sse/Warnung V erletzungsgef ahr durch sch arfe Messer_Arbeit en an d en Messern der Garnbindeeinicht ung @ 343\m od_143323163 9285_78.docx @ 2597128 @ @ 1
WARNING! – Danger of cuts from sharp blades!
Careless handling of the blades on the tying unit can cause minor or even serious injuries.
• Do not touch the blades on the tying unit.
• Wear protective gloves for all work in the area of the blades.
Pos: 50.45 /BA/Be dienung /Ru ndballenpresse/G arnbindung Co mprima/Schneid messer der Gar nbindeeinricht ung einstellen1 _Bild_Compr ima @ 344\ mod_14332319 48284_78.doc x @ 2597155 @ @ 1
1
Fig.
170
Pos: 50.46 /BA/Be dienung /Ru ndballenpresse/G arnbindung Co mprima/Schneid messer der Gar nbindeeinricht ung einstellen1 _Text_Compr ima @ 344\m od_14332319 49952_78.doc x @ 2597186 @ @ 1
• To adjust the blade angle, loosen the screw connection (1) and shift in the oblong hole.
• Retighten the screw connection (1).
Pos: 50.47 /BA/Be dienung /Ru ndballenpresse/G arnbindung Co mprima/Schneid messer der Gar nbindeeinricht ung einstellen2 _Bild_Co mprima @ 344\ mod_14332348 30343_78.doc x @ 2597351 @ @ 1
1
Fig.
171
Pos: 50.48 /BA/Be dienung /Ru ndballenpresse/G arnbindung Co mprima/Sc hneidmesser der Garnbindeeinric htung einst ellen2_Text_Com prima @ 344\m od_14332348 31715_78.doc x @ 2597382 @ @ 1
• To adjust the height, loosen the screw connection (1) on the sheet in front of the blade and
shift in the oblong hole.
• Retighten the screw connection (1).
Pos: 50.49 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1