Krone Comprima F 155 XC - Page 204

Settings
204
Pos: 50.58 /Ab kürzungen /Abkürz ungen sprac hneutral/Rundb allenpressen/Co mprima V @ 25 6\mod_139 7714229979_ 0.docx @ 196267 0 @ @ 1
Comprima V
Pos: 50.59 /BA/Ei nstellungen/Ru ndballenpresse/Sc haubild zentr ale Kettensc hmierung CV 150/ 210 @ 59\ mod_1297676 781655_78.doc x @ 559321 @ @ 1
RPN00048_2
Fig.
176
a
Rear floor conveyor drive
b
Starter roller
c
Spur wheel
d
Cutting system drive
e
Pick-up drive
f
Pick-up
g
Net roller
h
Main drive
The figures in the brackets state the size of the nozzles for the individual lubrication points.
Note
Make certain the correct sizes are used when changing the nozzles. Each size difference
doubles the oil delivery rate (MM4 delivers for example twice as much oil as MM3).
Pos: 51 /Layout M odule /---------------Seitenumbruch---------------- @ 0\mod_119617531 1226_0.docx @ 4165 @ @ 1