Krone Comprima F 155 XC - 13.14.1 Checking and maintaining tyres

Maintenance
230
Pos: 52.74.4 /Üb erschriften/Üb erschriften 3/P- T/RReifen prüfe n und pflegen @ 0\mod_11 97358037214 _78.docx @ 18094 @ 3 @ 1
13.14.1 Checking and maintaining tyres
Pos: 52.74.5 /B A/Wartung/Reife n/Reihenfolge Bil d 6-Loch @ 4\mod_1213 086131413_78. docx @ 86197 @ @ 1
1
KS-0-034
6
2
4
5
3
Fig.
197
Pos: 52.74.6 /B A/Wartung/Reife n/Reihenfolge R eifenmontage Te xt @ 4\m od_12130857 59054_78.doc x @ 86177 @ @ 1
When loosening and tightening the wheel nuts, observe the order indicated in the illustration. 10
operating hours after they have been mounted, check the wheel nuts and retighten them if
necessary. After that, check them every 50 operating hours to make certain they are tight.
Check the tyre pressure at regular intervals and refill if necessary. The tyre pressure depends
on the size of the tyres. The values are listed in the table.
Pos: 52.74.7 /B A/Wartung/Reife n/Anziehdrehm oment @ 0\m od_119995590 5460_78.docx @ 37340 @ @ 1
Tightening Torque
Threading
Key size in
mm
Number of bolts
per hub - pieces
Max. tightening torque
black
galvan.
M12 x 1.5
19
4/5
95 Nm
95 Nm
M14 x 1.5
22
5
125 Nm
125 Nm
M18 x 1.5
24
6
290 Nm
320 Nm
M20 x 1.5
27
8
380 Nm
420 Nm
M20 x 1,5
30
8
380 Nm
420 Nm
M22 x 1.5
32
8/10
510 Nm
560 Nm
M22 x 2
32
10
460 Nm
505 Nm
Pos: 52.74.8 /L ayout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.d ocx @ 4165 @ @ 1