Krone Comprima F 155 XC - 7.21 Menu 10 Manual operation (for the Net wrapping and twine tying version)

Terminal menus 7
Menu 10 "Manual operation" (for the "Net wrapping and twine tying" version) 7.21
RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51
Comfort 1.0_en 51
7.21 Menu 10 "Manual operation" (for the "Net wrapping and twine tying"
version)
n
10
M2
EQG003-049
ü For The menu level is active, refer to page36.
 To open the menu, select
.
Æ The display shows menu “Manual operation”.
The following status displays may appear on the screen:
Icon Explanation
Tying actuator (net) is in feed position.
Tying actuator (net) is in cutting position.
Tying actuator (net) is in tying position.
M2
Tying actuator (twine) is in central position.
Position is not defined.
The keys on the sides of the terminal can be used to control the following functions:
Icon Explanation
Move tying actuator (net/twine) to feed position
Move tying actuator (net/twine) to cutting position
Move tying actuator (net/twine) to tying position