Krone Comprima F 155 XC - 7.3 Mounting the bale ejector

Commissioning
74
Pos: 40.18.8 /B A/Erstinbetriebna hme/Rundballe npresse/De montage Transport- Spannvorr ichtung_Bild @ 3 64\mod_1440 492744530_78. docx @ 267 8125 @ @ 1
COM00418
2
1
5
3
4
6
Fig.
39
Pos: 40.18.9 /B A/Erstinbetriebna hme/Rundballe npresse/De montage Transport- Spannvorr ichtung_Text @ 364\mod_144 0486072495_ 78.docx @ 267789 2 @ @ 1
On right-hand and left-hand machine side:
• Dismount bolt (1).
• Loosen screw (2) evenly on both machine sides and do not remove it until the tension is
released from the tensioning rocker.
• Remove screw connection (3).
• Slide the slip-on bushing (4) downwards and remove it.
• Remove screw connection and connecting pipe (6).
• Mount bolt (1) on both machine sides at an equal height.
Note
Dispose of all dismounted parts properly.
Reuse is not permitted!
Pos: 40.19.1 /Üb erschriften/Üb erschriften 2/A- E/B/Ballenaus werfer montier en @ 467\mod _146900134143 9_78.docx @ 3 149042 @ 2 @ 1
7.3 Mounting the bale ejector
Pos: 40.19.2 /B A/Sicherheit/Ru ndballenpresse/A bsperrhahn sc hließen_Hydrauli k sperren_H A_Verweis auf Kapitel Sicherheits ausstattu ng @ 512\mo d_150272104548 7_78.docx @ 3 508006 @ @ 1
• Close the stop cock of the tailgate, see chapter Safety Equipment, “Stop cock tailgate”.
Pos: 40.19.3 /A bkürzungen /Abkürz ungen sprac hneutral/Rundb allenpressen/Co mprima V 150 ( XC) @ 402\ mod_1447939 350450_0.doc x @ 2846778 @ @ 1
Comprima V 150 (XC)
Pos: 40.19.4 /B A/Erstinbetriebna hme/Rundballe npresse/Ballen auswerfer/1_Sc hraubverbindung en der Aufnah mebleche lös en_Bild_Comp rima @ 191\ mod_138192 2071542_78.doc x @ 1633442 @ @ 1
Single axle
Tandem axle
COM00315
1
2
3
1
2
3
Fig.
40
Pos: 40.19.5 /B A/Erstinbetriebna hme/Rundballe npresse/Ballen auswerfer/1_Sc hraubverbindung en der Aufnah mebleche lös en_Text @ 19 1\mod_138192 2138919_78.d ocx @ 163350 1 @ @ 1
• Loosen, but do not remove, the screw connections (1, 2) in the mounting plates (3) on the
right and left of the bale chamber.
• Push both mounting plates (3) outwards.
Pos: 40.19.6 /B A/Erstinbetriebna hme/Rundballe npresse/Ballen auswerfer/2_Ball enausw erfer zwischen Aufn ahmebleche sc hieben_Bild_C omprima @ 191\mod_13819 22172149_78.d ocx @ 163353 0 @ @ 1