Krone Comprima F 155 - Page 350

7 Terminal menus
7.25 Menu 15 "Settings"
68
RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51
Comfort 1.0_en
15-2
2
state:
K01
K03
EQG003-031
 Observe the safety routine "Run actuator test safely", Running actuator test.
ü Menu 15 “Settings” is called, refer to page58.
 To open the menu, press
.
Æ The display shows the "Actuator test" menu.
Possible actuators (depending on how the machine is equipped)
An overview of the sensors, actuators and control units is provided in the circuit diagram in the
appendix.
No. Actuator Designation
K01
K01
Pick-up
K03
K03
Raising/lowering blade cassette
K20
K20
B
Blade group B (for the “Hydraulic blade group control system”
version)
K21
K21
A
Blade group A (for the “Hydraulic blade group control system”
version)
E02
E02
Warning beacon (for certain countries)
E20
E20
Working lights net roll (for the “Working lights” version)
E20/
E21
E20/E21
Working lights net roll (for the “Net and chamber film wrap-
ping” and “Working lights” version)
E21
E21
Working lights chamber film wrapping (for the “Net and cham-
ber film wrapping” version)
E22/
E23
E22/E23
Maintenance lighting side hood left/right
M01
M01
M1
Motor tying 1 (passive)