IV - 6
Maintenance
4.3.6 Checking the oil level and changing
the oil in the dresser gearbox (right/
left)
Check the oil level in the horizontal
position of the maize header in
transport position!
Checking the oil level
• Unscrew the oil level control screw (2) on the
dresser gearbox (1).
• The oil level must reach up to the control hole. If
necessary, add more oil through the control hole.
• Screw in the oil level control screw (2) again.
Changing the oil
• Swing the maize header into its working position.
• Unscrew the oil level control screw (2) on the
dresser gearbox (1). Collect the oil in a suitable
container.
• Screw in the oil level control screw (2) again.
• Swing the maize header into its transport position.
• Unscrew the oil level control screw (2) on the
dresser gearbox (1).
• Add oil (for filling quantity and type of oil, see
Chapter 4.3.1)
• Screw in the oil level control screw (2) again.
Dispose of old oil properly.
1
2
EC100370
To Next Page
Loading...
