Safety
22
Pos: 11.12.25 /BA/Si cherheit/4. Sic herheitsaufkleber/ EU - ISO /939/939 576 0 (2x) Beste ll-Nr. @ 302\mod_1413895 019097_78.docx @ 2352899 @ @ 1
8) Order No. 939 576 0 (2x)
Pos: 11.12.26 /BA/Si cherheit/4. Sic herheitsaufkleber/ EU - ISO /939/939 576 0 Bild/Text 3- fach Aufkleber @ 194\mod_13 83549620226_78. docx @ 1648864 @ @ 1
L
a) b) c)
a
b
c
a)
Danger from turning machine parts
There is a risk of injury as machine parts may
still continue to run for a certain time after being
switched off
• Do not touch any moving parts of the
machine.
• Wait until the machine parts have come to a
complete stop.
b)
Danger from objects being flung out
When the machine is running, there is a risk of
injury as objects may be flung out
uncontrollably.
• Before start-up, move guards into protective
position.
c)
Danger from objects being flung out
When the machine is running, there is a risk of
injury as objects may be flung out
uncontrollably.
• Keep your distance when the machine is
running.
Pos: 11.13 /BA/Sic herheit/6. Überarbeite te Warnhinweise/Hin weis - Nachbestellung/ Anbringung Aufkleber @ 0\mod_1195637337107_7 8.docx @ 1079 @ 33 @ 1
4.12.1 Re-Ordering the Adhesive Safety and Information Labels
Note
Every adhesive safety and information label is assigned an order number and can be ordered
directly from the manufacturer or from an authorized dealer (see Section "Contact").
4.12.2 Affixing the Adhesive Safety and Information Labels
Note - Affixing an adhesive label
Effect: Adhesion of the label
• The surface for affixing the adhesive label must be clean and free of dirt, oil and grease.
Pos: 13 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.doc x @ 4165 @ @ 1
To Next Page
Loading...
