Krone EasyCut 2801 CV - Mounting onto the Tractor

Commissioning
24
Pos: 14.9 /Überschri ften/Überschri ften 2/A-E/Anbau an den Trak tor @ 0\mod_1199717845194_7 8.docx @ 34039 @ 2 @ 1
5.3 Mounting onto the Tractor
Pos: 14.10 /BA/Sic herheit/6. Überarbei tete Warnhinweise/W arnung - Unbeabsichtig tes Abkuppeln angebaute @ 291\ mod_141042725386 6_78.docx @ 2294307 @ @ 1
Danger! - Inadvertent uncoupling of the machine during road travel or work.
Effect: Danger to life, serious injuries or serious damage to the machine.
• Use extreme caution when attaching or detaching devices to or from the tractor! The
accident prevention regulations must be complied with absolutely.
• The lower suspension arms on the tractor must be fixed in position
with the retaining chains or bars to prevent the machine from swivelling out during transport
or work. If the lower suspension arms (1) are equipped with catch hooks, the following
items must be taken into consideration:
Especially in the headland position, high forces develop in the lower suspension arm bolts (3)
that act upwards in the left-hand hook.
For this reason, the catch hooks must be in a flawless condition.
Additionally, the catch hooks must be secured in the provided locking hole (4) against
unwanted opening after the machine has been connected to the tractor.
Pos: 14.11 /Übersc hriften/Überschri ften 3/K-O/Kuppelpun kte @ 9\mod_12205313263 98_78.docx @ 126608 @ 3 @ 1
5.3.1 Clutching points
Pos: 14.12 /BA/Er stinbetriebnahme/Easy Cut/Die Unterlenker zapfen sind in Kat.II ausgeführt. @ 45\mod_1277712388953_78.doc x @ 421738 @ @ 1
The steerable pinions are designed according to cat. II.
Pos: 14.13 /BA/Inbetr iebnahme/EasyCut/An bau an den Traktor EC 2800/ 3200 @ 10\mod_1221811200180 _78.docx @ 137853 @ @ 1
Figure 4
• Connect the machine with the steerable pinions (1) to the tractor.
• Place the machine onto the parking supports.
Pos: 14.14 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1