Operation
44
Pos: 20.28 /Übersc hriften/Überschri ften 2/A-E/Abbau der Masc hine @ 3\mod_12047923878 24_78.docx @ 73245 @ 2 @ 1
8.5 Detaching the machine
Pos: 20.29 /BA/Sic herheit/EasyCut/Gefa hr - Maschine abstelle n_mit Hydrauliksc hlauch @ 9\mod_1220883208 423_78.docx @ 128830 @ @ 1
Danger! - Unexpected movements of the machine
Effect: Danger to life, serious injuries
• No one is permitted inside the danger zone.
• Park the machine on a solid and even surface.
• You should not unhitch the machine until the engine has been switched off and the ignition
key has been removed.
• Secure the tractor against rolling.
• Use extreme caution when attaching implements to or detaching them from the tractor! The
accident prevention regulations must be complied with absolutely.
• When connecting the hydraulic hose to and disconnecting it from the hydraulic system of
the tractor, the tractor system as well as the machine system must be depressurised! Move
the appropriate control valves into the flow position.
• When detaching the machine, do not walk between the tractor and the machine!
Pos: 20.30 /BA/Bedienun g /EasyCut/Abste llstütze/Abstel lstütze herunschwenke n Bild EC 2800/3200 @ 10\mod_12 22156432826_78.doc x @ 139032 @ @ 1
AMT-1-002
1
2
3
Figure 23
Pos: 20.31 /BA/Bedienun g /EasyCut/Abste llstütze/Abstel lstütze herunntersch wenken Text EC 2800/3200/ 3210/4013/6210 @ 11\ mod_1222666207476_78. docx @ 142107 @ @ 1
• Swivel the parking support (2) down and lock it in place with the bolt (1). Secure bolt with
spring cotter pin.
• Via the tractor hydraulics, lower the machine to the ground.
• Remove the PTO shaft guard retaining chains. Remove the PTO shaft from the PTO and
place it onto the PTO shaft support (3).
• Uncouple the lower suspension arm. Pull out the electrical connection cable between tractor
and machine from the plug on the tractor.
Pos: 20.32 /BA/Bedienun g /EasyCut/Abste llstütze/Abstel lstütze herunntersch wenken Zusatz QFBText EC 28 00/3200/3210/4013 @ 12\ mod_1224070921399_78. docx @ 150233 @ @ 1
• Swivel the parking support (2) down and lock it in place with the bolt (1). Secure bolt with
spring cotter pin.
• Via the tractor hydraulics, lower the machine to the ground.
• Remove the PTO shaft guard retaining chains. Remove the PTO shaft from the PTO and
place it onto the PTO shaft support (3).
• Uncouple the lower suspension arm. Pull out the electrical connection cable between tractor
and machine from the plug on the tractor.
Pos: 20.33 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
To Next Page
Loading...
