Krone EasyCut 2801 CV - Filling Quantities and Lubrication Designations for Gearboxes; Oil Level Check and Oil Change Intervals (Gearboxes)

Maintenance
61
Pos: 26.21 /Übersc hriften/Überschri ften 2/F-J/Füllmengen un d Schmiermittelbezeic hnungen der Getriebe @ 0\ mod_1196951094046_7 8.docx @ 15335 @ 2 @ 1
10.6 Filling Quantities and Lubrication Designations for Gearboxes
Pos: 26.22 /BA/W artung/Mähwerke/Hinweis Ei n Ölwechsel am Mähholm is t nicht erforderlic h. @ 68\mod_1304577391388_7 8.docx @ 628708 @ @ 1
Note
No oil change is required on the cutter bar.
Pos: 26.23 /BA/W artung/Tabellen_Füllmenge n/Mähwerke/Techni sche Daten Betriebss toffe Füllmengen EC 2801/ 3201/3600 @ 128\mod_ 1346671640368_78.doc x @ 1152703 @ @ 1
Filling
quantity
Filtered oils
Bio-degradable
lubricants
[litres] Brand name Brand name
Front swivel gear 1.7 l
SAE 90
On request
Input Gearbox 0.7 l
Speed gearbox (CV machines) 6.8 l
Cutter bar EasyCut 2801 CV 6.0 l
Cutter bar EasyCut 3201 CV 7.0 l
Cutter bar EasyCut 3600 CV 8.0 l
Pos: 26.24 /BA/W artung/Zeitinterval le an den Getrieben 200 h @ 0\mod_119 6951919921_78.doc x @ 15373 @ 3 @ 1
10.6.1 Oil Level Check and Oil Change Intervals (Gearboxes)
Note - Oil level check and oil change (gearboxes) and lubricating the machine
Effect: Long expected service life of machine
• First oil change on all gearboxes after 50 operating hours, then every 200 operating hours
(but at least once a year).
• Before using the machine always check the oil level.
• With bio-degradable oils the changing intervals must be complied with absolutely because
of ageing of the oils.
Pos: 26.25 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1