Krone EasyCut 2801 CV - Abrasion Limit

Maintenance
73
Pos: 26.34.16 /BA/W artung/Mähwerke/Versc hleissgrenze für Auswaschungen @ 0\mod_11972 68738875_78.doc x @ 16502 @ 3 @ 1
10.11.6 Abrasion Limit
Danger! - Abrasion on the cutting discs / blade drums
Effect: Danger to life or serious injuries.
• The abrasion limit (2) will be achieved if the min. material thickness of 3 mm is no longer
given.
EC-226-0
2
2
Fig. 49
Note
If cutting discs or blade drums show deformations or wear in form of abrasions (2) or similar,
these components have to be replaced by Original Krone spare parts .
Pos: 26.34.17 /Layout Module /---------------Seitenumbruch-------- -------- @ 0\mod_1196175311 226_0.docx @ 4165 @ @ 1