Maintenance
69
Pos: 26.32.1 /Üb erschriften/Üb erschriften 2/P-T/S chaltgetrie be@ 0\mod_119 7010889455_ 78.docx @ 15766 @ @ 1
10.9 Speed gearbox
Pos: 26.32.2 /B A/Wartung/Ölkontr olle_Wechsel/M ähwerke/Bild Schaltgetrieb e EC 2800/3200 C V @ 10\mod _1222322557 380_78.docx @ 13 9847 @ 2 @ 1
EC-0-041-1
Figure 40
Pos: 26.32.3 /B A/Wartung/Ölkontr olle_Wechsel/Öl kontrolle_ALT Ölkontrolle SAE 90 @ 0\ mod_119700897381 5_78.docx @ 1 5649 @ 3 @ 1
Oil level check:
• For time intervals, see Chapter "Oil Level Check and Oil Change Intervals (Gearboxes)".
• Unscrew the inspection screw (1)
• Oil level up to bore hole (1)
• If necessary, top up the oil (SAE 90)
• Screw the check screw (1) back in.
Pos: 26.32.4 /B A/Wartung/Ölkontr olle_Wechsel/Öl wechsel_A LTÖlwechsel Versi on1 (Belüftungsfilt er) @ 0\mo d_119701002 6283_78.docx @ 15747 @ @ 1
Oil change:
• For time intervals, see Chapter "Oil Level Check and Oil Change Intervals (Gearboxes)".
• Screw out the screw plug (2).
• Collect the used oil in a suitable drip pan
• Screw in the screw plug (2)
• Fill oil (3) (oil level up to hole (1))
• Screw the inspection screw (1) and ventilation filter (3) back in.
Pos: 26.32.5 /B A/Wartung/Ölkontr olle_Wechsel/Ölq ualität /Öl menge: siehe Ka pitel @ 0\mod _1197007859 486_78.doc x@ 15 531 @ 3 @ 1
Oil quality / oil quantity: see Chapter "Filling Quantities and Lubricant Designations for
Gearboxes"
Pos: 26.32.6 /B A/Wartung/Ölkontr olle_Wechsel/Alt öl ordnungsg emäß entsorge n @ 0\mod_ 1197008117002_7 8.docx @ 155 50 @ @ 1
Note
The used oil must be disposed of correctly
Pos: 26.33 /BA/--- ------ ------Seitenumbruch---- ------------ @ 0\m od_1196175311 226_0.docx @ 4 165 @ @ 1