Krone EasyCut 6210 CV - Position of the Adhesive Safety Stickers on the Machine

Safety
19
3.14 Position of the Adhesive Safety Stickers on the Machine
GL
3
3
3
7
5
EC-1-074-1
3
3
6
6
RH+LH
RH+LH
RH+LH
Fig.
2
:
RH = right-hand side of the machine
LH= left-hand side of the machine
1) On the green gearbox
The PTO speeds must not exceed 1000 rpm!
The operating pressure of the hydraulic system
must not exceed 200 bar!
939 101-4
MAX.1000/ min
MAX. 200 bar
Order No. 939 101-4 (1x)
2)
Before starting the machine,
read and observe the
operating instructions and
safety instructions.
Order No. 939 471-1 (1x)
3)
Danger in the swivel range
939 472-2
Order No. 939 472 2 (5x)
4)
While parts are moving, never
reach into areas where there is a
risk of being crushed.
Order No. 942 196 1 (8x)
942 19 6 -1