EasyManua.ls Logo

Krone EasyCut 6210 CV - Mounting Onto the Tractor; Clutching Points

Krone EasyCut 6210 CV
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Commissioning
23
5.3 Mounting onto the Tractor
Danger! - Inadvertent uncoupling of the machine during road travel or work.
Effect: Danger to life, serious injuries or serious damage to the machine.
Use extreme caution when attaching or detaching devices to or from the tractor! The
accident prevention regulations must be complied with absolutely.
In order to prevent swivelling of the machine during transport or work, the lower suspension
arms on the tractor must be secured by limiting chains or bars. If the lower suspension
arms (1) are equipped with catch hooks, the following items must be taken into
consideration:
High forces develop in the lower suspension arm bolts (3) especially in the headland position.
For this reason, the catch hooks must be in a flawless condition. Additionally, the catch hooks
must be secured in the provided locking hole (4) against unwanted opening after the machine
has been connected to the tractor.
5.3.1 Clutching points
The steerable pinions are designed according to cat. II.
EC-2-033
3
4
1
Figure
3
Connect the machine with the steerable pinions (1) to the tractor.
Place the machine onto the parking supports.

Table of Contents

Related product manuals