EasyManua.ls Logo

Krone EasyCut 6210 CV - Hydraulics; Special Safety Instructions; Connecting the Hydraulic Lines

Krone EasyCut 6210 CV
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Start-up
29
6.3 Hydraulics
6.3.1 Special Safety Instructions
Warning ! - Connection of the hydraulic line
Effect: severe injuries due to penetration of hydraulic oil under the skin.
When connecting the hydraulic hoses to the hydraulic system of the tractor, the system
must be relieved of the pressure on either side.
Due to the risk of injury when searching for leaks, always use suitable tools and wear
protective goggles.
Seek medical help immediately should injuries occur! Danger of infection.
Depressurise prior to uncoupling the hydraulic hoses and working on the hydraulic system!
Check the hydraulic hose lines at regular intervals and replace them if damaged or worn!
The replacement hoses must fulfil the technical requirements set by the equipment
manufacturer.
6.3.2 Connecting the hydraulic lines
Warning - If the hydraulic hoses are interchanged when connecting them to the
hydraulic system of the tractor, the functions will be interchanged as well.
Effect: Injuries, serious damage to the machine
Identify the hydraulic connections.
Always ensure correct connection between the machine and the tractor.
When engaging the hydraulic hose, the hydraulic control unit must be in float position or in
"lowering" position.
Caution! - Soiling of the hydraulic system
Effect: Damages to the machine
When connecting the quick couplings, ensure that these are clean and dry.
Note chafing areas or points of contact.

Table of Contents

Related product manuals