Start-up
33
6.5 Lighting
Danger! - Lighting system
Effect: Danger to life, serious injuries or serious damage to the machine.
• Before transporting on public roads, always connect the lighting system and perform a
function check.
• Keep the lighting system clean. Soiled lights and spotlights impair road safety.
• Replace defective light bulbs or broken spotlights.
• When transporting on public highways, the machine must be in the transport position.
6.6 Lighting connection
To comply with the Road Traffic Licensing Regulations, the machine is equipped as follows by
default:
• Front and rear with warning panels (5)
• Front on the warning panels with white side lamps (3)
• Rear with 3-chamber rear lamps (4) (direction indicator: reversing light and brake light)
Fig.
The lighting system is connected via the 7-pin connection cable (2).
To do this:
• Insert the 7-pin connection cable plug (2) into the appropriate socket (1) of the machine.
• Insert the 7-pin connection cable plug (2) into the appropriate socket of the tractor.
• Position the cable so that it will not come in contact with the wheels.
Note
Before inserting the plugs, make certain the plugs and sockets are clean and dry. Dirt and
moisture may result in short circuits!
To Next Page
Loading...
