Settings
45
9 Settings
DANGER! - Unexpected movement of the machine
Effect: Danger to life or serious injuries.
• Setting tasks must only be performed when the drive is switched off and the engine is at a
standstill!
• Switch off engine.
• Remove the ignition key and carry it with you.
• Secure the tractor against rolling away.
WARNING!
Unexpected movement of the machine!
The machine may move unintentionally if the parking brake is not activated when parking the
machine. Thus there is a risk of serious injuries or death.
• Always apply the parking brake when the tractor is left or the machine is switched off.
9.1 Adjusting the cutting height
Fig.
The cutting height can be adjusted to different soil conditions.
The cutting height adjustment for each cutter bar is set by turning the crank (1).
For larger modifications of the cutting height, the setting of the forward guards must be checked.
To mow higher than the highest adjustment level allowed by the spindle, mount the adjusting
skids (see chapter in Special Equipment entitled "Adjustable Skids").
To Next Page
Loading...
