EasyManua.ls Logo

Krone EasyCut 6210 CV - Adjusting the Guards; Lateral Guards

Krone EasyCut 6210 CV
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Settings
46
9.2 Adjusting the Guards
DANGER! Stones forcibly projected during operation
Effect: Danger to life or serious injuries.
Check the guard cloths regularly. Worn or damaged guard cloths must be replaced!
The protective equipment on the mowing unit, e.g. cloths and hoods, protects against flying
stones and similar objects, and also prevents access to dangerous parts. Because of this,
you must always move it to its protective position before starting work
Fold the side plate(s) down and secure with twist locks before use
9.2.1 Lateral guards
EC-0-027
Fig.
23
Lateral guards can be vertically adjusted. For this purpose, unscrew the screws (1) and (2).
Adjust the mounting bar (3) vertically. Tighten the screws.

Table of Contents

Related product manuals