Krone EasyCut 6210 CV - Filling Quantities and Lubrication Designations for Gearboxes; Oil Level Check and Oil Change Intervals (Gearboxes)

Maintenance
60
Type
Tyre identification
Tyre pressure [bar]
EasyCut 6210 CV
15.0/55-17 10 PR
3.5
500/45-22.5
1.5
Threading
Key size
Max. tightening torque [Nm]
black
galvanised
M 18 x 1.5
24
265
245
10.6 Filling Quantities and Lubrication Designations for Gearboxes
Note
No oil change is required on the cutter bar.
Filling
Quantity
Filtered oils
Bio-degradable
lubricants
[litres]
Brand name
Brand name
Front swivel gear
2 x 1.6 l
Synthetic DIN
51502-PGLP *
On request
Rear swivel gear
2 x 2.0 l
SAE 90
Transfer gearbox
0.65 l
Input Gearbox
2 x 0.7 l
Speed gearbox
2 x 1.9 l
Cutter bar
7.0 l
*) = Order No. 926 028 0 (5 litres)
10.6.1 Oil Level Check and Oil Change Intervals (Gearboxes)
Note - Oil level check and oil change (gearboxes) and lubricating the machine
Effect: Long expected service life of machine
• First oil change on all gearboxes after 50 operating hours, then every 200 operating hours
(but at least once a year).
• Before using the machine always check the oil level.
• With bio-degradable oils the changing intervals must be complied with absolutely because
of ageing of the oils.