Maintenance
65
10.9 Transfer gearbox
Fig.
Oil level check:
• Unscrew the inspection screw (1)
• Oil level up to bore hole (1)
• If necessary, top up the oil (SAE 90)
• Screw the check screw (1) back in.
Oil change:
• Screw out the oil drain plug (2)
• Collect the used oil in a suitable drip pan
• Screw in the oil drain plug (2)
• Top up the oil (3) (oil level up to hole (1))
• Screw the inspection screw (1) and locking screw (3) back in.
Oil quality / oil quantity: see Chapter "Filling Quantities and Lubricant Designations for
Gearboxes"
Note
The used oil must be disposed of correctly
To Next Page
Loading...
